06 April, 2013

Building Pyramids

Hi there, 
it's me, Kathy here this time to try and inspire you to try 
something Funky this weekend!

If you've never made a Pyramid  card before then here's a great way to use your Funky Hand downloads and have a go at one straight away.

I made one of these for the first time a few weeks ago using Bazzill card and then adhering patterned paper to decorate it.  I usually use much thicker card for my card blanks but this style of card is quite bulky when folded.  Part way through making it I had an "A-ha!" moment and realised that using my Funky Hand downloads I could print the first "layer" directly onto card and create a thinner and easier to fold pyramid card base,  
Of course you could simply print your chosen Funky Hand designs directly onto the card without any tweaking at all, but I thought you might be interested to see how I get the most from my sheets of card, as by doing it this way you're left with lots of space on each sheet which you can then print more designs on to use in decorating your card.

 I use an old version of Paint Shop Pro to do pretty much any sort of photo or graphics tasks, but I'm sure that other programs, such as PhotoShop have the same sort of tools.  I thought the best thing would be to do a series of screen shots so that you can then have a look around your own photo-editing program for the similar menus, tools and commands.  

So here we go - you can click on the pictures for a better look!

Step 1

Select the design you want to use - in this case the pink chevron design from 
"I Love You Sew"
Use the tool marked with no. 1 and drag the grab-lines to a rough square shape as indicated in the picture.
Now click on CROP to get rid of the excess "paper"

Step 2

Now you need to find the tool that allows you to RESIZE the image and click on it to open up the resizing window

Step 3


You want to create a square which is about the right size for your project, so go for the ACTUAL SIZE option - this is a fab tip for printing other things like photos and other images just the right size too, btw
* Make sure that it's all set to resize all layers/dimensions at the same time - where I've drawn asterisks on the picture.  I Never touch this section of the box - I just know I'd have a disaster on my hands if I did
* Set to pixels/cms in the box marked no 2 or inches if you prefer to work in Imperial measures
* It's the box marked with no 3 that you change the numbers in rather than the ones marked height/width so as I want a square of around 14cms I changed the number in the RESOLUTION box until the number in the height box were about right 
Remember, I just guessed at the original square shape, the height turned out to be a bit shorter than the width so it's the height I need to get the right size for before printing

Step 4

Check all is well before printing by using the PAGE SET UP command.  It brings up a new window with a picture of how your image will look on the page - like the one below

Step 5


You just need to check you printer settings now
You need to use a thin card (about 160gsm) for this particular project to reduce the bulk and make it easier to fold.  I need to use the REAR TRAY to feed this through, and I need 3 copies
Then click print and you're done.

Once you've printed your three squares, don't cut them out straight away.  Measure how much white space you have below the square and use the resizing method above to crop down some of the other designs, and fill the white space with those designs.  
You're not finished yet as you can print on the reverse of the 3 sheets too. 
 If you want to leave the inside of the pyramid "legs" white, just print on the reverse of the "other end" of the card ie not on the back of where the squares are.  Remember that the inside of the legs will show, so if you don't want them plain white, print each of the three pieces with the same paper design on the reverse of the squares.  
I hope all that makes sense!

Making the Pyramid

Cut out your 3 squares accurately and fold each in half diagonally
Take the first 2 squares and adhere the edge of the upper one to the fold of the lower one matching the points and edges really carefully.  
The edge of the 3rd square is then adhered to the fold in square 2

Hopefully the photos will help make it clearer!

I've used a white square in this middle and clipped the 3 squares together just to show how they all fit - it's not as complicated as it sounds, is it?

Once they are glued together the pyramid just falls into shape of it's own accord really, the two end triangles overlap and are glued together and the base shape is formed. 
 
At this point you need to squash and fold one "face" in half  inwards so that the card can be flattened to go in an envelope

Now you can use all the extra bits of card you printed out to decorate it - just remember to keep the folded-in area fairly simple or it won't fold up!

In true Blue Peter spirit, here are more photos of the one I made earlier!

I really hope you'll have a go at this - it's sure to impress as it looks sooooo much more complicated than it is ;)  
We can keep the secret of how easy it is to ourselves!
Please share a photo of anything you make with Funky Hand goodies; to make it easy for you there's an Inlinkz gadget you can use and we'd all really love to see what you are making.

Happy Crafting

Kathy xx


4 comments:

  1. Fantastic tutorial dearie.You're a star.Going to have a go.Fantastic shaped card and great use of the new funky hand I love to sew papers.Hugs Debbie x

    ReplyDelete
  2. great idea- i must try that
    AllisonX

    ReplyDelete
  3. Wow Kathy this is fantastic and a brilliant tutorial to go with it. What fab inspiration!
    Anice xx

    ReplyDelete
  4. awesome card kathy, love the 3D effect
    huge hugs Lou xxx

    ReplyDelete

We hope you have enjoyed the paper craft inspiration from the Funky Hand Design Team. Leave a comment, we'd love to hear from you.