28 December, 2013

Now That's Funky

Good evening, Allison here with a little make- a little floral card for you from an old favourite, the  Now That's Funky CD.
This blue spotty paper must be one of my all time favourites but the CD is jam packed with lots of lovely papers and the sentiment backers in the extras section were used to make the flower for the centre of the shaped card. I am now thinking maybe some flourishes would be nice so might add them and then be back to show you
Hope you all had a wonderful Christmas and are looking forward to some exciting things from Funky hand in the New Year


24 December, 2013

Merry Christmas from us all.

Merry Christmas to all the Get Funky & Craft readers.  Thank you for joining us here over this year and we look forward to sharing more crafty techniques and inspiration with you in 2014.  Have a wonderful Christmas time.

The Funky Hand Design Team. xx

21 December, 2013

Using Wordbook Offcuts

I am a big fan of the Wordbooks that Anice designs - I make quite a few of them during the year as they are easy to make and look fantastic!  However, when cutting out the 'pages' for the wordbooks, I'm always left with a top and bottom strip as I print on both sides of my card.

So, what to do with these strips as I don't like to throw anything away - just in case!

I've made this gift card wallet using leftover strips from the Blue Christmas wordbook download.  I made sure that the strip would be long enough to make the band to go round the wallet itself, added a dotted line with a blue gel pen around the edges and then embossed the front of the wallet with Swiss Dots and inked the edges.

On the inside, I added the little flap to contain the gift card from a matching scrap of card so that I can make two of the wallets from a sheet of A4 card.  I've always got scraps of card left over!

I've added some glittered snowflakes and also some ribbon I found in my stash and the gift card wallet is finished!  I've got lots more left over strips to use up so I'll be making more of these in the future!

19 December, 2013

A mug of cheer!!!

Digi stamp- Mug of cheer.
Papers- Silent Night from Funky Hand.
Morning peeps!!

How are you all today?!!! fabulous I hope. It's Lou in with a Funky Hand share for you all today!!!

I absolutely love all the mugs Anice has in the store, they are so much fun!! paper piecing them just makes me smile and with the colours of the Silent Night download this card just made me smile from ear to ear as I was putting it together.

I added a couple of swirly swooshy steam puffs coming out of it too!! I love a little bit of fun!!

Huge hugs Lou xx

18 December, 2013

Layering a Funky Hand digital stamp.

Hi everyone, Anice here.  It's my last post on the Get Funky and Craft Blog..for 2013.  How is your December going, all ready for Christmas Day yet?  I'm not, but what's new with that!

Today I thought that I would share my idea for layering one of the Georgie digital stamps 'Georgie Angel' Now, for this post I messed around with the stamp and created a GSD to cut out the image with my cutting machine.  You don't have to have a cutting machine.  You could just print out the digital stamp image four times and just cut the parts that you want to layer out.

Please remember: Not all digital stamp designers would be happy with you doing this sort of thing so you must remember to check all terms and conditions linked with each stamp.  If it is not mentioned there, doesn't mean it's OK to do.  Always ask.

Right, here is what I started out with for this project,

 I decided that I wanted to layer her face, the upper part of her body and her hands holding the heart.

I coloured the images in with Promarkers before I cut them out.  Colouring small parts of images when they are already cut out is really hard in my opinion but if you prefer to cut out first please go ahead.

Sorry, that was the perfect opportunity to show off my Promarker collection to you. To say I'm a bit obsessed with them is a little bit of an understatement!

Before I go on, if you have a few Promarkers you might like to grab this really helpful free download from Sarah Hurley.

It's a fab layout of all the names of the currently available Promarkers (including Limited Editions) with circles to add the pen colour to. Print the download onto the same paper/card that you use for colouring your digital stamps and colour in each of your markers. It will then give you a true coloured effect.  Sarah has laid them out in a really helpful order.  Grab the free download from her website  http://www.sarahhurleydesigns.co.uk/oldshop/prod_2834920-Promarker-Colour-Charts-Updated-for-Winter-2013.html  Please don't just share this freebie with your friends send them over to Sarahs website to grab their own copy. 

Here is Georgie all coloured in.  If you want more details about the colours I used then pop over to my personal blog Funky Hand Thoughts for more information.

I decided to colour in each section of the image as I wanted no white bits showing under the layered stamp, but also, because it was an opportunity to practice the colouring, as the lower levels of the face, upper body and heart wouldn't be in clear view!

Here's the finished card I made with the digital stamp.  And here is a closer look at the layering..

I used 1mm foam pads to layer the head and upper body and 3mm foam pads for the heart.  I'm pretty pleased with how it turned out.

If you have purchased the Georgie Angel digital stamp and would like the GSD I used in this post, send me a message through the Funky Hand website Contact Us page and I will email it to you for free.

So, I hope you all have a wonderful Christmas and you receive any crafting stash that you have asked Santa for.  I'm crossing my fingers that he will have some of the Promarkers that I have missing from my collection in his sack for me.  I've been a very good girl all year..well most of the time.  Hehe!

Anice xx

15 December, 2013

A Stylish Christmas Coffee

Hello hello! Tabbatha here today! I’m continuing on with the fabulous Christmas cards that the ladies have been showing on the blog. 9 days left until Christmas Eve (Julafton)! I can’t believe 2013 is over, I swear it just began. :)

For my card today I wanted to show off the fabulous I Love You More Than Coffee digital stamp that Anice has made for us. It will be available under the Digital Stamps section of the Funky Hand site – and trust me you’ll want to grab it! Although the digi stamp is all about coffee, complete with a great sentiment, I chose to mask the sentiment and create a Christmas Themed 3D Paper Pieced Takeaway Coffee Shaped Card! Yup, I combined three techniques into this card.

Ok, so what are we doing today?

Well, glad you asked! Today I’ll be going over how you can create your own shaped card using a fab digital stamp using just a graphics editor like Adobe Photoshop. This technique works for pretty much any graphics editor or vector editor like Adobe Illustrator, GIMP (which is free!) as well as the super simple Trace, Print & Cut in Silhouette Studio.

To get this card created, I first sized and paper pieced the I Love You More Than Coffee digital stamp using the Stylish Tree downloadable backing papers. Since I was 3D paper piecing this piece, I paper pieced three different copies of the cup, making sure to mask the sentiment, and then fussy cut and glued together the dimensional pieces. To finish the top off, I printed and cut different Christmas themed cutting files I had from the Silhouette Store. You can easily stamp your own Christmas sentiment or image right there on the label though – that is the beauty of masking and digital images!

So…on to that nifty little cardbase thing.

Here is the how the card looks opened up (you’ll notice a color difference, that is because silly Tabbatha here forgot to get inside pics of this Christmas card, but instead I’m using the previous card I made). :)

The idea is to trace the digital image, duplicate and flip it, combine and then stroke. This leaves a great outline that can be easily printed out on cardstock and cut with scissors!

Step 1. To get started, Open a copy of the I Love You More Than Coffee 1 PNG file, this is the one that has a white image on a transparent background. Size the image to a width of 8.49 cm, making sure the Maintain Aspect Ratio (the chain) is ON.

Step 2. Using the Magic Tool (left hand toolbar) select the transparent area outside of the image. You will know you have a selection when you see dancing ants around the border.

Step 3. Once you have the selection go up to Select > Inverse, this will select the cup itself (make sure there are dancing ants ONLY around the cup). Create a New Layer and fill the layer with black.

Step 4. This is where we make the card base. Duplicate (Copy/Paste) the solid black image and move it so that it sits slightly overlapped to the left of the first black image. This might be easier by first making a New File (A4 size) and copying the black cup into it. Make sure the duplicate is selected in your layers menu then go to Edit > Transform > Flip Horizontal. (Just imagine my cup outlines are actually completely filled in with black!)

Step 5. Now we need to merge the two black images. Again, making sure that the cups are overlapped as much as you dare (I left a slight opening on the top, but you can close it up). Select the two black cup layers and Right Click > Merge Layers.

Because the two images were filled in with the same color, this “Merge Layers” acts as a Union (which is the control in Silhouette Studio & Adobe Illustrator).

Step 6.  Now, we don’t want to print out a solid black cardbase, so select the layer and click the little fx button (Add a Layer Style). First apply a white Overlay, then a Stroke in black (I have a stroke of 3 in the screenshot, however I would go thinner when printing so maybe a 1 or 2 and possibly in a different color depending on the cardstock).

Additionally, you want the cardbase to be slightly larger than the digi image itself. I resized the cardbase by simply overlying (in Layers) the digi and Ctrl+T (Edit > Free Transform Path).

This is the finished product, placed on an A4. Once the image is printed, cut around the solid black lines, using an exacto knife for the inner opening. Fold along the dotted line.

The Finished Product

Here is the finished product again! It was such a great project and I LOVE the I Love You More Than Coffee digital stamp – so versatile!


Don't forget to link up any projects that you have made using Funky Hand products!

06 December, 2013

Christmas Nativity

Hello all x Sammylou here with a quick nativity-inspired make today.

My card, made for my niece uses papers from the Dreams Come True CD-rom and the gorgrgeous Georgie Angel digistamp.

 She was coloured with promarkers and I used some glitter and die-cut snowflakes and added a sentiment to finish her off. I'm hoping my niece will love it! 

See you all soon, love Sammylou xXx